Ventrac Compact Tractors
Ventrac Minute Mount Attachments
The Ventrac line of compact tractors are some of the most versatile tractors on the market. No other compact tractor gives you more Power, Productivity, and Versatility than Ventrac. More than 30 commercial-grade attachments incorporate the Ventrac Minute Mount attachment system. Minute Mount is Quick, Efficient, and requires NO TOOLS. With the optional category 3-point hitch, non-powered attachments can be operated from behind the tractor individually or simultaneously with the front.
Ventrac attachments (in alphabetical order):
Aerator
The Ventrac EB480 Aerator offers the exact tools to address your turf grass conditions. No matter what treatment your turf requires, coring, slicing, or fracturing, the EB480 can be easily configured to suit your requirements. The tines are replaced either individually or by quickly changing the entire mounting heads. This gives the EB480 both versatility and longevity to best accommodate your needs.
AERA-Vator
When turf compaction caused by foot or vehicle traffic, sporting events or other stresses is a problem, periodic aeration is necessary to keep the turf healthy.
The AERA-vator is designed to stir and loosen the soil beneath the sod without destroying the turf. The EA600 creates a core hole without bringing a core plug to the surface, leaving the turf ready for use immediately after treatment. Six holes are created each foot (66 holes per square meter) and hole size is regulated by drive speed-- the slower the drive speed, the larger the hole.
The AERA-vator works best in dry un-irrigated ground leaving a core hole while fracturing the sub soil.
Blades
Ventrac KD Power Angle Blades have working widths of 48, 60, and 72 inches (122, 152, 183 centimeters). All control functions are performed with the S.D.L.A. control for raising and lowering the blade or angling it left or right. Adjustable skid shoes accommodate dozing at selected heights, such as moving snow on gravel driveways.
The blades can be operated in a trip position for plowing or in a locked position for digging into material. The Ventrac Minute Mount system allows you to connect to the blade quickly and easily, without tools.
Ventrac Power Angle Blades are versatile, laborsaving attachments designed for any number of jobs. From grading, leveling, and backfilling ground to plowing snow, moving material, or cleaning an area, the Ventrac KD series blades are up to the task.
Blower
The revolutionary LA160 Power Blower features a vertical shaft design that delivers a powerful, yet quiet performance. The blower can be used to remove leaves, light snow, water, etc.
The blower housing can be rotated 180 degrees either manually or with an optional hydraulic motor. This allows the operator to move debris in the desired direction without hindering operation. Two gauge wheels maintain a consistent distance from the surface.
Broom
The LB540 Power Broom is designed for the sweeping and removal of snow, leaves, dirt, light gravel, and other materials from parking lots, sidewalks, and other surfaces. Heavy duty nylon bristles make short work of any clean up job without damaging the surface below
A hydraulic cylinder angles the broom left or right from the operator's seat. Adjustable gauge wheels set the height of work for precise adjustment. Optional outrigger wheels allow for controlled adjustment when de-thatching turf. An optional front debris curtain is available for less over throw of material.
Edger
The ED200 Edger is designed to edge sidewalks, curbs, and cart paths as well as edging and maintaining flower and mulch beds. Edging can be done on either the right or left side per the operator's choice.
For hard ground edging, three 42 lb. (19 kg) weights may be added. The Multi-Position swivel wheel can be adjusted to various heights to follow a variety of terrain.
For the maximum in productivity and performance, a bidirectional blower can be added. This allows you to edge and blow debris from the area being edged all in one efficient pass. The blower has multiple positions including right, left or down which adds to its versatility.
Excavators
The HJ Excavator is designed to dig either in forward or reverse.
Dual cutting edges include one serrated and one smooth to tackle tough jobs or delicate work. The serrated cutting edge makes short work of digging in hard soils and is great for serious excavating. The smooth cutting edge is great for sod removal and peeling to a desired depth.
Manual rotation of the rear bucket panel is all that's necessary to change cutting edges and direction of action, allowing you to tackle your job either head on or from the rear.
Field Mower
The LQ450 Field Mower is designed to cut heavy grass and small brush growth. Two counter-rotating blades discharge the cut grass to the center rear. Suspended front chains allow tall grass to be cut more effectively and reduce the potential for front discharge. Three pins provide three cutting height options: 2 1/4, 3 1/2, and 4 3/4 (5.7, 8.9, and 12.1 cm).
A single swivel tire is located on the front center frame of the mower. This position greatly reduces tree branch interference. Skid shoes on both sides provide anti-scalping and blade protection.
The tree shield kit can be installed for use on tree farms, vineyards, nursery's, etc. This shielding protects both the trees and the operator. Branch lifters and tractor tire covers are standard equipment with the tree shield kit.
Generator
Reliable, portable power where and when you need it. The Ventrac HG150 Generator gives you 15,000 Watts of electrical power wherever and whenever you need it. Multiple receptacles in both 120 and 240 Volts accommodate a wide variety of needs. The HG150 is great for standby use or portable power when mounted on a 4000 series tractor.
Mower Decks
Ventrac HM & HP Mower Decks utilize a rugged all steel frame design, which suspends the Ventrac's progressive discharge deck. This design gives you a high efficiency grass discharge for a better quality of cut by moving more grass efficiently through the deck tunnel. With the removal of two pins beneath the cross frame, the deck can be easily tilted to a near vertical position for maintenance and storage.
All HM and HP decks offer full-width rear rollers with large pneumatic front swivel caster tires to float over the terrain independent of the tractor. Engage the tractor's integrated adjustable weight transfer system, (option on the 4100 series) which transfers a percentage of the mower weight back to the tractor, for increased traction and stability on slopes and inclines.
The HP deck is a 72-inch mower which is offset to the left side 8 inches. This aids in mowing along ditches, ponds and trimming around obstacles, keeping the tractor on solid ground. The offset also makes for a smaller cutting radius increasing productivity.
The LAS Linear Adjustment System, provides cutting height selections between 1 3/4 to 4 3/4 inches (4.5 to 12 cm). A single hand height adjustment allows for an effortless change in cutting height. A slide release allows the handle to be returned to the deck level preventing it from catching on low obstacles.
All Ventrac finish mowers feature full width rollers for exceptional yard striping. These professional grade mowers are built to give you maximum performance and productivity.
Power Rake
The KP540 Power Rake is designed for leveling rough ground and new yard installations, as well as removing surface rocks and debris. Its compact design allows the operator to work in tight quarters including around corners and edges.
Seventy-two replaceable carbide tips pulverize and refine the soil. Materials can be moved forward or to either side by hydraulically angling the drum left or right. The drum can also be reversed to allow back-dragging of soils. A rotating handle raises or lowers the rotor in 1/8th inch increments allowing 3 1/2 inches of travel.
Adjustable side wings can be lowered on both sides for routing material.
Slip Scoops
Ventrac Slip Scoops are a must for any Ventrac owner. The scoops are great for transporting material such as soil, sand, gravel, mulch, debris, snow, and much more. Used for landscaping, excavation, backfilling, leveling, digging and grading, the slip scoops are an indispensable attachment from construction sites to your own backyard, allowing you to say goodbye to your old wheelbarrow.
Ventrac Slip Scoops are hydraulically controlled from the driver's seat, allowing for smooth, effortless operation. The Slip Scoop is designed to sit upright after detachment, with the lift arms in the proper position for direct reconnection when the scoop is used again.
Snow Blower
Tackle the worst winter weather with the Ventrac LX420 Snow Blower. The Snow Blower is an aggressive power attachment for moving snow, especially snow that may be too deep for a plow, or snow waiting to be piled or thrown some distance.
The LX420 easily attaches to the Ventrac model 3000 model, enabling you to attack the snow, get the job done, and get back inside where its warm. The hydraulically controlled discharge shoot allows you to throw the snow fully to either side of the tractor without difficult mechanical operations in the coldest weather. The LX420 throws the snow between 30 and 50 feet distance (9-15 Meters), clearing a wide swath without moving the same snow repeatedly. The heavy duty design of this Snow Blower allows you to rely on it to get the job done, season after season, no matter how deep the snow gets.
Sod Cutter
Ideal for landscapers or homeowners, the EC240 sod cutter cleanly cuts sod for flowerbeds, walkways, and lawns. With a cutting depth of 0 to 2 1/2, the EC240 can be used to cut thick lush grass or even to shave off the last bit of dirt to prepair your work site.
Stump Grinder
The LC150 Stump Grinder makes quick work of unwanted stumps and roots. Heavy-duty carbide cutters provide extended and effective performance in spite of dirt, stones, and debris in work area. The stump grinder mounted on the 3000 Series tractor creates an agile, powerful machine for even the toughest jobs in the tightest places.
Steering wheel-controlled articulation provides side-to-side cutting action. Forward and reverse motion is controlled with the tractor's hydrostatic drive.
The drop stand performs three functions: A stand for remounting, a blade to refill the hole, a depth gauge to preset the desired depth of cut.
Terra Rakes
Ventrac KR Terra Rakes perform a variety of landscaping tasks. From soil preparation, leveling ground, to removing rocks and debris, the KR502 and KR702 work with ease and efficiency.
The curved tines on the Terra Rake can be used in either direction. Unlike pull-behind units, Ventrac Terra Rakes are front mounted, allowing the operator to keep material from being driven over. This minimizes compaction as well as making the Terra rake very easy to use. The Terra Rake can also be mounted to the rear 3-Point Hitch with the Ventrac 3-N-1 Adapter for pulling material.
Front gauge wheels are adjustable front-to-back. If a wider surface area is needed, optional 10 -inch extensions are available, giving the operator an additional 20 inches of surface area.
Tiller
The KL480 Tiller is designed for easy preparation of gardens and yards. This power-driven front-end attachment allows the operator to easily monitor the Tiller's performance. Designed with VENTRAC's Minute Mount System, the Tiller can be attached in a minute or less and comes with a stand for storing the Tiller when not in use.
A number 80 chain in an enclosed final drive is lubricated for heavy-duty performance. Skid shoe adjustments facilitate cutting depth. Twenty-four carbon tines are sequentially spaced to maximize the cutting force.
Tough Cut Mower
The HQ680 Tough Cut Mower is designed for mowing high grass, thick weeds and brush. A large baffled front opening allows brush to enter for cutting and hinders debris from escaping.
Three heavy-duty blades counter rotate to cut and drop materials evenly without windrowing. Capable of cutting material up to a half inch in diameter, the HQ680 makes short work out of heavy brush.
The Tough Cut can be adjusted to three cutting heights: 3, 3 5/8, and 4 1/4 inches. Easy servicing of belts and pulleys is provided by the hinged and removable cover. The tilt-up deck provides easy access to the blades.
Trencher
The KY400 Trencher is capable of trenching up to 40 inches (102 cm) in depth with a 5 1/2 inch (14 cm) wide cut. It is designed with dual Push-N-Pull cylinders to assure positive boom control for digging, boom lift, and transport.
The terminator/cup combo chain offers carbide cutting tips for excellent cutting performance in a variety soil conditions. Digging teeth bolt onto the chain for easy replacement.
The KY400 attached to a VENTRAC 4000 Series tractor gives the operator the ability to maneuver into hard-to-reach locations without damaging the turf like a traditional track unit would.
Turbine Blower
The Ventrac ET200 makes quick work of any clean up job. The Turbine Blower is designed to blow large volumes of air, and is much quieter than a conventional leaf blower. The ET200 can be used to blow leaves, light snow, and remove debris from sidewalks, parking lots and other areas.
The ET200 Turbine Blower's powerful front discharge nozzle can be hydraulically rotated 360 degrees from the comfort of the operator's seat. The dual action front bumper/deflector protects the nozzle from damage. When the nozzle is pointed downward the deflector bars on the bumper direct the airflow forward, clearing a path directly in front of the tractor.
Power and control allow you to move through your clean up work simply, quietly, and efficiently. The Ventrac Minute Mount System allows you to get attached quickly, and move on to the next job.
V-Blade
The Ventrac KV550 V-Blade offers you maximum flexibility and productivity for any material handling task. Each blade is controlled by its own hydraulic cylinder, allowing full control of the tool shape from the comfort of the driver's seat. Using Ventrac's exclusive S.L.D.A. controls, both the tractor movement and the attachment control is handled at one convenient location.
The KV550 V-Blade can be easily adjusted for height, with skid shoes setting the push height of the blade. Changeable cutting edges allow the KV550 to be kept in peak operating efficiency. Optional deflection edges and side flares give the KV550 the ability to be customized to suit almost any application.
The KV550 operates easily on 3000 and 4000 series tractors with the required 12V switch and plug kit.
VERSA-Loader
The KH500 Versa-Loader functions much as you would expect a loader to do, but has more capacity than many other similar machines. The KH500 can quickly be changed from a loader, bucket or fork to a posthole digger or tree auger. Six different accessories fit the Versa-Loader. Accessories can be removed and replaced in just minutes.
Loader Accessories: Mulch Bucket, Tine Forks, Pallet Forks, Post Hole Digger, Tree Auger*,Boom Lift
